Sabine FBX-SOLO SL820 Manuel d'utilisateur télécharger pdf (Page 20)

PRODUCT SPECIFICATIONS

FILTERS

Eight independent digital notch filters controlled

automatically from 40 Hz to 20 KHz

Filter width: 1/10 octave, typical, or 1/5-oct.

selectable; constant "Q"

Filter depth: DSP controlled, variable to -50 dB

Resolution: 1/50th octave

Time required to find and eliminate feedback:

0.4 sec., typical @ 1 KHz

Total number of combined filters active: User

selectable, from 1-8

Number of Dynamic vs. Fixed filters: User

selectable

Last configuration stored in memory

INPUT/OUTPUT - SL820 ONLY

I/O Connectors: 1/4" TRS; tip = input, ring =

output, sleeve = ground

Input Impedance: Unbalanced >1 meg Ohm

Output Impedance: Unbalanced 10 Ohms

nominal; Maximum load 2K Ohms

Maximum Input/Output Level at lowest gain:

+20 dBV

Gain Range (with line out selected): 0 to +35 dB

(high in), +30 to +65 dB (low in)

Input to Output Gain @ unity setting: +/- 0.5 dBV

Bypass: Digital

INPUT/OUTPUT - SM820 ONLY

I/O Connectors: XLR-3 PIN 2 high Balanced

Input Impedance: 1K Ohm nominal

Output Impedance: Unbalanced 10 Ohms

nominal; Maximum load 2K Ohms

Maximum Input/Output Level at lowest gain: -10

dBV**

Gain Range: -15 to +20 dB (at high output)

Input to Output Gain @ unity setting: +/- 0.5 dBV

Bypass: Digital

EIN: -105 dBm @ 150 Ohms, 20 Hz - 20 KHz or

better

Phantom Power: 48V switch selectable

1 2 ... 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Sabine FBX-SOLO SL820 Manuel d'utilisateur Page 20